HI-TENSILE RECLAIM RUBBER
Samsara Rubber Reclaimers LLP manufacture high tensile reclaim rubber of tensile strength upto 15MPA in house. This type of rubber is made from the end of the tyre and the thread’s peeling obtained from end-of-life truck and bus radial tyres. We manufacture this in 3 different Grades as per customer requirements. This type of reclaimed rubber is suitable for multiple purposes.
GRADES
TECHNICAL SPECIFICATIONS
| PROPERTIES | UNITS | TEST METHOD | SAMSARA - HT10 | SAMSARA - HT12 | SAMSARA - HT15 |
| LIMITS | LIMITS | LIMITS | |||
| PHYSCIAL PROPERTIES | |||||
| MOONEY VISCOSITY | ML (1+4)@100C | ASTM D1646 / IS 6306 | 50 - 60 | 50 - 60 | 50 - 60 |
| HARDNESS | Shore A | ASTM D2240 / IS 6306 | 55 - 65 | 55 - 65 | 55 - 65 |
| TENSILE STRENGTH | kg/cm2 | ASTM D412 / IS 6306 | 100 Min. | 120 Min. | 150 Min. |
| ELONGATION AT BREAK | % | ASTM D412 / IS 6306 | 350 Min. | 400 Min. | 450 Min. |
| SPECIFIC GRAVITY | gm/cc | ASTM D297 / IS 6306 | 1.14 ± 0.03 | 1.14 ± 0.03 | 1.14 ± 0.03 |
| CHEMICAL PROPERTIES | |||||
| CARBON BLACK | % | ASTM E1131 / IS 6306 | 18 - 27 | 18 - 27 | 18 - 27 |
| ASH CONTENT | % | ASTM D297 / IS 6306 | 9 Max. | 8 Max. | 7 Max. |
| ACETONE EXTRACT | % | ASTM D297 / IS 6306 | 14 ± 3 | 14 ± 3 | 14 ± 2.5 |
| VOLATILE MATTER | % | - | 1 Max. | 1 Max. | 1 Max. |
| RUBBER HYDROCARBON | % | ASTM E1131 / IS 6306 | 47 Min. | 47 Min. | 47 Min. |
APPLICATIONS
FEATURES
Reduced Mixing cycle time enables higher production rate
Reduced Energy Consumption
Better penetration of compound into fabric
Reduced shrinkage and minimized crown effect
Reduced sheet deformation
Ensures low reversion rate
Faster extrusion rate
Less die swelling resulting in smoother extrusion
